Home / Up / CS186DV in 1.5 cu ft ported enclosure / CS186DV in 2.5 cu ft ported 32 Hz enclosure / CS186DV in 2.5 cu ft ported 42 Hz enclosure / CS186DV in 3.0 cu ft ported 22 Hz enclosure / CS186DV in 4.0 cu ft ported 42 Hz enclosure / CS186DV in 6.0 cu ft ported 42 Hz enclosure / CS186DV in 10.0 cu ft ported 42 Hz enclosure

spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes) spacer.gif (13x13 -- 43 bytes)

CS186DV in 3.0 cu. ft. ported, 22 Hz box @ 1000 watts (Car.)

 spacer.gif (13x13 -- 43 bytes) spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes)
spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes)
spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes)

CS186DV Performance curve

This is another one of the designs our engineer likes to throw in as an alternative, where your car’s natural acoustic boost is used to extend the low end ridiculously low.  The trade-off is less, but more accurate, bass in the 40-80 Hz range, a little less power handling, and a rather  interesting port requirement.  But…  with our CS186DV, you still have 1000 watts of power handling, and enormous output capacity, all the way down to 17 Hz!  Holy shaking floorboards, Batman!!! Get out your ol’ Telarc CD’s or maybe your Jurassic Park or Star Trek 1 (The Klingon Battle) DVD’s…  The fine print:  Use an 8” I.D.  x 88 3/8” long port (50.26 sq. inches). Yes - that’s right, the port takes up almost as much volume itself as the enclosure, so, you really WILL  have to be creative.  This is almost a quasi-transmission line system. At 1000 watts, you will not need a subsonic filter, unless you have source material that goes below 17 Hz.  For that matter, if your  source material doesn’t go under 18 Hz, you can pump in the full 1200 watt power rating.  Prepare to be amazed.