Home / Up / CS124V in 1.0 cu ft ported enclosure 35 Hz / CS124V in 1 cu ft ported enclosure 42 Hz / CS124V in 1.5 cu ft ported enclosure 30 Hz / CS124V in 1.5 cu ft ported enclosure 42 Hz / CS124V in 2.25 cu ft ported 112 SPB enclosure / CS124V in SPB 212 ported double enclosure / CS124V in 3.0 cu ft ported enclosure 42 Hz

Your ALT-Text here Your ALT-Text here Your ALT-Text here CS124V in 1.00 Cu Ft Ported @ 800 Watts, 35 Hz Your ALT-Text here Your ALT-Text here Your ALT-Text here
Your ALT-Text here Your ALT-Text here Your ALT-Text here Your ALT-Text here
Your ALT-Text here Your ALT-Text here Your ALT-Text here Your ALT-Text here

Performance curve

This system uses our high power CS124V, cast frame woofer in a 1.0 cu. ft. enclosure for smooth, powerful, yet effortless low bass. An external port is most likely needed, as the port requirement is 3” I.D. x 13.5” long, or, better, 4” I.D. x 25” long. But, if you can work that in, or out, this system puts out a lot of solid, clean bass, down to under 30Hz (in-car), in a very handy, small package. Below that, use a sharp High Pass filter at 28 Hz, for good power handling.