Home / Up / 12RPSLD4 in 3.0 cu ft ported enclosure at 42 Hz / 12RPSLD4 in 3.0 cu ft ported enclosure / 12RPSLD4 in 2.25 x 2 cu ft ported Super Bass dual enclosure / 12RPSLD4 in 2.25 cu ft ported Super Bass single enclosure / 12RPSLD4 in 2.5 cu ft ported enclosure / 12RPSLD4 in 2.0 cu ft ported enclosure / 12RPSLD4 in 1.5 cu ft ported enclosure / 12RPSLD4 in 1.0 cu ft ported box 42 Hz / 12RPSLD4 in 1.0 cu ft ported box / 12RPSLD4 in 1.0 cu ft sealed box / 12RPSLD4 in .75 cu ft sealed box / 12RPSLD4 in .5 cu ft sealed box

spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes) spacer.gif (13x13 -- 43 bytes) 12RPSLD4 in 3.0 Cu Ft Ported Enclosure @ 800 Watts - 42 Hz spacer.gif (13x13 -- 43 bytes) spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes)
spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes)
spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes) spacer.gif (5x5 -- 43 bytes)

Home and car system.

This is an excellent system for high output, if you have room for a 3 cu. ft. box, but a limited budget.  It uses our new 800 watt 12RPSLD4, radial roll cast frame woofer, and is tuned for maximum output in the 40-50 Hz range. Check the curve:  it is a LOT of  output!  The port requirement is 4” I.D. x 3 1/2” long, or, 5” I.D. x 6 1/2”long.  Also, use a sharp High Pass filter at 30-32 Hz, for good power handling and the highest, clean output.   We’ve mentioned “output” 4 times, um, now 5 times here – you get the idea!