Our loss is your gain! Take advantage of the rock bottom prices offered on Credence over-runs, obsolete models, surplus, and the occasional warehouse wearied. We're offering these models at below build costs so warranty is limited to "Good out of the box".  Subject to limited availability.

			PB10-4

Recommended for use in sealed or ported enclosures. 800 watts max, 400 watts continuous RM. These name brand 10" woofers feature a 2 1/2" 4 layer American made coil, heavy weight black poly cone with Santoprene edge, vented pole, heavy steel powder coated frame, 84 oz. double stacked mags, inverted cap, and full wrap around gasket. Fantastic buy on a rock solid, high performance subwoofer.

800 watts max. in recommended sealed box = .33 cu ft. (300 watts continuous RMS)

May be used in sealed boxes from 0.25 to 0.40 cu ft. (700 watts max. in 0.40 cu ft box)

800 watts max in recommended 110SPB or 210SPB Super Bass box. (400 watts continuous RMS)

May be used in ported boxes from 0.50 to 2.0 cu ft.

Price and order information in The Speaker Store.

			OA10-4

300 watts max in recommended boxes. 150 watts continuous RMS in recommended boxes. Tremendous  bargain featuring a 2" voice coil, 38 oz. magnet, grey powder coated steel frame, wet look heavy paper cone, Kapton coil former (finest DuPont material - no foreign imitation), and more. Great for both car audio and home theater systems either as a woofer or subwoofer. Moderate to high power handling with plenty of cone travel (extra basket to spider clearance and deep bumped single piece back plate). Durable double thick red foam cone surround material. Shiny wet look, hard pressed cone body.

Looks good in a 0.6 cu. ft. box at 230 watts max. Port = 3" I.D., 9" long or flared port 2.5" I.D., 6" long. Really needs HP filter at 38 Hz.

Price and order information in The Speaker Store.

			SA12-4

300 watts max in recommended boxes. 150 watts continuous RMS in recommended boxes. Great opportunity to buy a solid, made in the U.S.A., sub for the unbelievable price of 15.00! These 12" woofers feature a 2" voice coil, 38 oz. magnet, grey powder coated steel frame, Kapton coil former (again, finest DuPont material - no foreign imitation), black wet look hard pressed cone body with durable double thick red foam surround material, and more. Great for both car audio and home theater systems as either a woofer or subwoofer. Moderate to high power handling with plenty of cone travel (extra basket to spider clearance and deep bumped single piece back plate).

Looks good in a 1.5 cu. ft. box at 250 watts max. Port = 4" I.D., 11" long (Fb = 40.4 Hz). Really needs HP filter at 30 Hz.

Price and order information in The Speaker Store.

			BN10-8

350 Watts max, 250 Watts Continuous RMS in recommended boxes. Very good in .5 cu ft sealed box. Also good in a 1.0 cu ft ported (3" I.D. x 18" long) box for home use. This 10", 8 ohm woofer features machined plates, black wrinkle powder coated finish, steel frame, smooth .050 black poly cone, Kapton former, and vented pole.

Recommended system - .5 cu ft sealed box @ 350 watts. Compares well with "Solo baric" type drivers. Very nice, clean, strong system in a very small box. Looks good, with the machined top and back plates, and excellent performance for the money.

Price and order information in The Speaker Store.